SUN-OT4800 PALM OTDR
 |
 |
SUN-OT4800 Palm OTDR |
SUN-OT4800 palm OTDR series is the newest instrument designed for testing FTTx network. It's mainly used to measure the physical characteristics of optical fiber under test, such as the length, the transmission loss and the splice loss etc.. It can also locate the faults or breaks of optical fiber. It's widely applied in the manufacture, construction and maintenance in optical fiber communication system.
SUN-OT4800 palm OTDR series has the most advanced technology of double-color & material integrative mould, which is novel and beautiful in appearance. It offers three wavelengths and VFL in one handheld unit, especially for testing passive optical network (PON) in FTTx. In addition, it's equipped with a comfortable gallus for carrying conveniently.
Main Features:
1. Extra-short Event Dead Zone
SUN-OT4800 palm OTDR series has 1.6m extra-short event dead zone, which is suitable for testing short optical fiber and pigtail optical fiber.
2. High-speed auto measurement
The function of fast auto measurement of SUN-OT4800 palm OTDR series makes it unnecessary for the operator to know about the further details of operating. Simply connect the fiber, press [Start], and then the result is displayed in a few seconds. You can view the trace and event table.
3. High-speed auto analysis
SUN-OT4800 palm OTDR series can search and locate the events and faults in trace rapidly and precisely, and then list all events in event table, so it's very useful for maintainers to improve efficiency and it's unnecessary to know about the relative background knowledge.
4. Strong file management
SUN-OT4800 palm OTDR series offers powerful function of file management. Besides saving, browsing and deleting files to or from USB stick and built-in memory, it can be connected to laser or inkjet printer based on PCL language, and the testing report can be printed rapidly and easily. In addition, SUN-OT4800 can communicate with PC using ActiveSync via USB cable, through which the files can be translated rapidly.
5. Convenient VFL (Visual Fault Locator)
The built-in 650nm visual fault locator is ideal for easily identifying bad splice, bad connector, break or macro bend.
Other Features:
1.
Handheld, lightweight and convenience for carrying
2. The most advanced technology of double-color & material integrative mould in trade
3. Advanced anti-reflective TFT LCD, visible clearly in field
4. 0.25m high resolution, 65535 sampling points
5. Double USB interfaces, supporting USB stick and direct cable download to PC via ActiveSync
Supporting Bellcore GR196 file format in writing or reading
6. Function of intelligent indicating of remaining capacity of battery and warning if the voltage
of battery is low.
7. WinCE operation system, double operating interface of Chinese and English
8. Built-in lithium battery with high capacity for over 10 hours of operating life
9. Universal FC/SC/ST connector type, and convenient for surface cleaning
10. Unique function of updating system on-line
Application:
SUN-OT4800 Palm OTDR series is mainly used to measure FTTx network, and provides a low cost solution for users. SUN-OT4800 offers three measuring modes: manual mode (including real time mode and average mode), auto mode and dead zone mode.
Manual measurement mode: Manual mode is suitable for the skilled operator who is familiar with the instrument. In this measurement mode, to get more accurate results, real-time mode or average mode can be selected if necessary.
In real-time mode, the dynamic changes of fiber chain can be detected timely. It is very useful when you need to watch the effect and process of fiber being spliced or connected.
In average measurement mode, the noise in trace can be suppressed, and the SNR (signal noise ratio) is improved, therefore, the result is more accurate. In fact, the more average times are executed, the more noise in trace is suppressed, and the longer time is spent for signal processing. In practice, the average times should be set properly according to necessity.
Auto measurement mode: The optimized measurement conditions are set automatically. It's unnecessary for the operator to know about the complicated background knowledge and the further details of operating. In this mode, the more accurate results can be gained when proper average times are set, but it will increase the time of signal processing.
Dead zone mode: This mode is suitable for testing optical fiber with short distance, and the optimized settings of distance range, pulse width and attenuator can be executed automatically. To get the best result, the terminal return loss should be guaranteed less than -40dB.
Specifications:
MODULE |
A |
B |
C |
Wavelength |
1310nm/1550nm
±20nm |
1550nm/1625nm
±20nm |
1310nm/1550nm/1490nm
±20nm |
Dynamic Range(Note1) |
28/26dB |
26/24dB |
28/26/24dB |
Applicable Fiber |
Single-mode |
Distance Measurement Accuracy |
±(1m + sample space + 0.003% * measurement distance) |
Event Dead Zone(Note2) |
≤1.6m |
Sampling Resolution |
0.25, 0.5, 1, 2, 4, 8, 16m |
Distance Range |
4, 8, 16, 32, 64, 128, 256km |
Pulse Width |
10, 30, 80, 160, 320, 640, 1280, 5120, 10240ns |
Loss Threshold |
0.01dB |
Sampling Points |
65534 |
Linearity |
0.05dB/dB |
Memory Capacity |
≥800 Traces |
IOR Setting |
1.00000~2.00000 |
Display |
Color LCD (touch screen) |
Interface |
USB, Min-USB |
VFL |
650nm±10nm, 2mW(typical); CW/1Hz |
Language |
Simple Chinese/English |
Optical Connector |
FC/UPC (universal connector) |
Power Supply(Note3) |
DC: 15V~20V(3A), (AC adapter 100~240V, 50/60Hz, 1.5A)
Built-in Lithium battery: 4400mAh, 7.4V, operating time≥10 hours |
Dimensions |
210mm*100mm*60mm |
Weight |
About 1kg |
Note1: Pulse width 10240ns, average times≥300, SNR=1, 23℃±2℃
Note2: Pulse width 10 ns, terminal reflection loss≥40dB, typical
Note3: At back light low brightness, measurement not executed
Ordering Information:
| Part No. |
Operating Wavelength |
Optical Fiber Type |
Dynamic Range |
SUN-OT4800A |
(1550nm/1625nm)±20nm |
SMF |
26/26dB |
SUN-OT4800B |
(1310nm/1550nm)±20nm |
SMF |
28/26dB |
SUN-OT4800C |
(1310nm/1550nm/1490nm)±20nm |
SMF |
28/26/24dB |
Standard accessories:
| Item |
Name |
Quantity |
1 |
Power line |
1 |
2 |
AC/DC adapter |
1 |
3 |
Quality certification |
1 |
4 |
User manual |
1 |
5 |
Trace analyzing software (CD) |
1 |
6 |
Hard Carrying case (Including gallus) |
1 |
7 |
Special gallus of instrument |
1 |
Options:
Item |
Name |
Type |
Note |
1 |
USB stick |
|
Saving measuring data |
2 |
Printer |
Hp LJ P2015d or Hp LJ 1022 |
Printing traces |
3 |
USB cable |
|
Communicating with PC |
4 |
Soft carrying case with nylon material |
|
Carrying case |
5 |
Standby battery pack |
Special battery pack for SUN-OT4800 palm OTDR |
Standby battery |
6 |
FC/SC/ST connectors |
|
|
Note: For the necessity of improvement, the material contained in this document is subject to change without notice.
